Mold pouring, clone production;
integrally formed, reject splicing The pearlite
increases
20% strength and hardness of parts. Tiny graphite sheets inside, which are distributed in
the
pearlite matrix, provides higher structural
rigidity and excellent damping effects and creep resistance. The whole structure keep small
deformation and low vibration while having ultra-high acceleration and speed in processing,
which offers an extremely-high machine
accuracy. This will effectively reduces iteration cycle and cost .
Use aviation grade aluminum alloy. The whole pyramid stable structure is anti-twist, anti-overturning and owns the best mechanical properties. Hive-type cavity design can separates internal and external stress effectively. The dense structure of ultra-high pressure plasticity production raises strength into a high level, achieves the lightest weight with best rigidity, ensures high speed and high accuracy.
360°radar system can detect any obstacles in advance and Z axis high-speed motion will be activated to imme diately avoid obstacles, avoiding collisions.
This function Lowers the damage rate of laser head, and accordingly reduces maintenance cost, prolonging service life of the machine. Avoid production halt caused by collisions, ensuring continuous production.
Only need to press one button to start, sparing the need for repeated adjustments, reducing operating difficulty and making cutting convenient and practical.
After checking the box on the interface, you can start leftover material cutting process, reducing material waste and overall cost.
Six plans (as shown in the pictures) are offered to help all kinds of plate cutting, once again upgrading our machines’ practicability.
Significantly reduce perforation time, average perforation time of medium & thick plate is reduced to 4s.
The system automatically matches perforation parameters which ensures the consistency of perforation parameters in continuous perforation process without repeatedly modification.
Avoid blasting holes and avoid the failure of sheet overheating for prolonged perforation.
Laser abnormality identification & intelligent alarm, provides protection when the laser light is abnormal.
Equipment Power :
6KW-40KW (IPG,MAX)
Material :
Carbon Steel,Stainless Steel
Thickness :
20-50mm
200m/min linkage speed, 4G linkage acceleration and Z axis response speed is speedy and efficient, reduces use cost
1-3s to complete edge searching and positioning, 6 times as fast as capacitance edge searching.
Apply smart sensor system to achieve ±1.0mm comprehensive positioning precision and 0.1mm max cutting precision, improving both material usage rate and product passing rate.
Use digital processing to avoid the risk of probing collision of the following module, guaranteeing the safety.
Widen the application situations, suitable for not only standard rectangle sheets but multiple sheet shapes.
Smartly choose vortex process according to the material and its thickness, sparing the need for repeated adjustments and reducing operating difficulty.
Remove the slag produced during perforation to the greatest extent, making sure that the cutting edges are smooth and intact.
Greatly improve stability of cutting follower, and prolong service life of nozzle and ceramic ring.
Multiple combination of control system and mechanical device,bevel cutting at any angle within 0-45°.
Realize the bottom side or bilateral round off sharp edges,diversified incision forms, Applicable to a variety of application scenarios.
Thick plate cutting realizes to doubles the speed while ensuring the cutting quality.
At a specific power, cutting cost is only 10% of nitrogen cutting and creates more economic value for clients.
The nitrogen pressure reduces to 4Bar during cutting the 10mm stainless steel, its speed improves at least 10% than common cutting.
Realizing high-speed and high-precision cutting.
Support customized development. Beckhoff can customize Bodor interface and Bodor specific features to support multi-touch screens and monitor device processing condition remotely.
EtherCat bus control provides quick signalling and high-accuracy of sync, especially for high-speed cutting.
Adopting abundant and accurate control system can realize automatic replacement of nozzles according to different materials and thicknesses, saving manual replacement time and improving processing efficiency, smart and convenient; Newest automatic calibration and cleaning functions can achieve fully automatic laser head calibration and nozzle cleaning, reducing the repetitive manual work; High-precision drive system provides a reliable replacement precision and stability to ensure that every replacement can be perfectly safe. Fully enclosed protection of the whole part improves the safety of parts and personal.
German Rexroth Motor Driver
PRECITEC Auto Focus Laser Head
Germany Rexroth Guideway
Germany Atlanta High Precision Rack
Germany Stober Decelerator
Japan SMC Electric Proportional Valve
Company
Products
Video
* Owing to the real-time updating of products and technologies, the datas and product pictures on the site are for reference only
Process for
Cutting Leftover Material
New generation of intelligent perforation
technology
