Smart size, easy to place and set to work. BIG EYE design of transparent acrylic window, convenient for viewing. Stainless steel hollowed table, easy to discharge smoke.Electric up-down work table, facilitated with ball screw transmission system, capable of processing non-metal materials of different thickness.Under non-work state, open left door to clean the interior space. 3 in 1 closed crossbeam (guide rail, belts, tank chain integrated in the beam).
Convenient - Wireless control High
efficiency - One PC can control more than one set machines
1.When the working current is 4mA and the tube is in the state of pre-ionization, the laser can be used for high-frequency impulse engraving.
2.The product is featured for working under large power rate and long service time, which is suitable for the cutting of knife mold machine and thick acrylic sheet.
It features equal load ratings in the radial, reverse radial, lateral directions, and self-aligning to absorb installation-error.
Thus, the linear guideline is characterized with long service life with high speed, high accuracy and smooth linear motion.
Higher Acceleration Ability
Better Acceleration Performance
|Laser Type||CO2 Sealed Laser Tube, 10.6μm|
|Cooling Type||Water Cooling|
|Laser Output Control||(0-100% Set by Software )|
|Min. Engraving Size||Chinese: 2.0mm*2.0mm, English Letter: 1.0mm*1.0mm|
|Highest Scanning Precision||4000DPI|
|Controlling Software||DSP Control System|
|Graphic Format Supported||DST PLT BMP DXF DWG AI LAS,etc|
|Drive System||High-precision 3-phase Stepper Motor|
|Auxiliary Equipments||Exhaust Fan and Air Exhaust Pipe|
|Working Environment||Temperature:0-45℃,Humidity 5-95%(No Condensate Water)|
|Optional Spare Parts||Honeycomb Worktable, Rotary Device,Auto-focus Device|
* Owing to the real-time updating of products and technologies, the datas and product pictures on the site are for reference only