For cutting/ engraving. Economic, cost-effective multi-functional laser cutting machine.Five reflection mirrors and one lens design to ensure stable and constant light path, excellent Reliable product quality and overall cutting ability (multi-functional, applicable for cutting stainless steel, carbon steel, acrylic, MDF, die board).. Non-contact metal cutting auto-following device, to cut all kinds of materials with less investment.
Convenient - Wireless control High
efficiency - One PC can control more than one set machines
1.When the working current is 4mA and the tube is in the state of pre-ionization, the laser can be used for high-frequency impulse engraving.
2.The product is featured for working under large power rate and long service time, which is suitable for the cutting of knife mold machine and thick acrylic sheet.
It features equal load ratings in the radial, reverse radial, lateral directions, and self-aligning to absorb installation-error.
Thus, the linear guideline is characterized with long service life with high speed, high accuracy and smooth linear motion.
Higher Acceleration Ability
Better Acceleration Performance
|Laser Type||Sealed Co2 Laser Tube,10.6μm|
|Cooling Type||Water Cooling|
|Laser Output Control||(0-100% Set by Software )|
|Highest Scanning Precision||4000DPI|
|Max. Cutting Thickness||30mm|
|Max. Cutting Speed||20m/min|
* Owing to the real-time updating of products and technologies, the datas and product pictures on the site are for reference only