Main Feature

1. A camera is installed inside the protective cover to oversee real-time operation within the cover and shoot any possible problems timely. 
2. Designed multi-functional trolley can do loading and unloading work at the same time, vacuum grip device can uplift weight up to 220kg, significantly reducing labor intensity and improving work efficiency.
3. When needed, loading and unloading of multiple machines can be operated at the same time by concatenation.Modular design meets the current design trend and improves work efficiency. It is possible for one person to operate several machines at the same time.
4. Feeding mode is driven by frequency conversion motoreducer of high transmission power and higher safety, enabling continuously variable transmission for different operating frequencies.

Fully understand from different views by 360-degree showing

Demo video, learn more about the product

Technical Parameters

Model P1530A Option
Working Area 1500x3000mm According to demands
Laser Output Power 500w/700w/800w/1000w/1500w/2000w/2500W/3000w
Positioning Accuracy 0.03mm
Reposition Accuracy 0.02mm
Max.Moving Speed 100m/min
Max.Cutting Speed 35m/min

WIFI Wireless Control

For speedy service, we add WIFI function for our technician to operate troubleshooting and adjust parameters remotely. 
Check laser source parameters to analyze failure causes.
Check cutting parameters to analyze and adjust new parameters.

Switzerland RAYTOOLS Laser Head

Rotary Knob type focus point adjustment for fine and flexible adjustment. Adjustable range: 20mm, accuracy: 0.05mm.
Drawer type mirror seat to make protect glass replacing faster and easier.
Both collimating lens and focal lens could apply compound lens for optimal optical quality and cutting result.
Modular design with optional collision-proof protective devices or pneumatic knife to realized swiftly switch between welding and cutting.
Optional magnetic collision-proof protective modular that would activate reliable separation and immediately light off in case of collision.

France MOTOREDUCER

Satellite gears are double-supported on hardened and ground shafts with full-complement needle bearings increasing torsional stiffness.
Backlash ≤ 3 arcmin.
Standard operating temperature range is -15℃ to 45℃.
Protection rated IP 65 standard.

France Schneider Servo Motor

Using the SoMove setup software: The SoMove setup software could do the control loop configuration. optimization,and maintenance, for the Lexium Easy 26 servo drives in automatic or manual mode by oscilloscope function,as same as other Schneider Electric drives.
Equipped with SoMove software for easy setup and adjusting
Driver Printed circuit board with coating protection,improve the reliability in the polluted environment

France Schneider Electronic Component

Circuit protection against short-circuit currents,
Circuit protection against overload currents,
Breaking and industrial disconnection as per standards IEC/EN 60947-2.
Overvoltage resistance,
High performance limitation,
To fast closing independent of the speed of actuation of the toggle.

Japan SMC pneumatic components

Stepless control of air pressure proportional to an electrical signal.
Serial communications specifications.
Compact/lightweight (Integrated communication parts).

Japan NSK Bearings

These bearing housings have square flange which can be easily attached to a machine with four bolts.
With its simple mounting face, this bearing unit is widely used.

Laser Source

Wavelength range:1070~1090nm
Beam quality TEM00 (M2<1.8)
Forced air/Water cooling
More than 100000 hours work-life of pumped diode

Automatic Lubrication System

Electrical lubrication is a kind of gear pump with rational construction, great performance and comprehensive functions.
By connection with program control system in the main machine, the lubrication system could oversee oil level within tank as well as oil transmission pressure and set lubrication periodicity, which will effectively prevent rust within lubrication system to ensure cutting accuracy.

Laser Cutting System

The software is embedded with a rich memory of laser cutting setting references, flexible layout designs and tool path editing, data import/export, bridging, co-edge, beam compensation, curve smoothing, division, combination, automatic identification of exterior and interior modes and so on, compatible with laser source brands such as IPG, SPI, JK, Raycus, etc., capable of running for CO2 and YAG.

Application

The machine can be applied for the processing of stainless steel, carbon steel, alloy steel, spring steel, copper plate, aluminum plate, gold, silver, titanium, metal plate and tubular products. 
Widely used in production of advertising board, metal plate structure, Hv/lv electrical ark production, textile machinery parts, kitchen utensils, car, machinery, elevator, electric parts, spring sheet, subway line spare parts, etc..

Contact Us