Laser Engraving And Cutting Machine BCL-X

CO2 Laser Cutting Machine manufacturers

Laser Engraving And Cutting Machine BCL-X

1. Drive system with high precision linear guide and slide block, high precision, wear resistance, small resistance, high speed; arc-gear synchronous belt 3m, stable transmission, strong shock absorption ability and small noise.
2. Red Cross accurate positioning, convenient and quick in finding engraving and cutting position.  
3. Three-mirrors and one focal lens path system to deliver outstanding engraving and cutting effect.
4. Equipped with manual modulation focused laser head, responsive and accurate, the machine can adjust the focus position according to engraving and cutting alternation and the material characteristics and thickness of the plank, to ensure sculpture quality.

WIFI remote control

WIFI wireless control

Convenient - Wireless control High
efficiency - One PC can control more than one set machines
Laser tube

Laser tube

1.When the working current is 4mA and the tube is in the state of pre-ionization, the laser can be used for high-frequency impulse engraving.
2.The product is featured for working under large power rate and long service time, which is suitable for the cutting of knife mold machine and thick acrylic sheet.

Japan Omron Electronic  components

Japan Omron Electronic components

HIWIN

HIWIN

It features equal load ratings in the radial, reverse radial, lateral directions, and self-aligning to absorb installation-error.
Thus, the HG series linear guideline is characterized with long service life with high speed, high accuracy and smooth linear motion.
Stepper motor

Stepper motor

Low Noise
Low Vibration
Smooth Operation
High Torque
Higher Acceleration Ability
Better Precision
Better Acceleration Performance
3 Phase NEMA 42 stepper Motor
Technical Parameters

Model BCL1006X BCL1309X BCL1610X BCL1812X
Working Area 1000*600mm 1300*900mm 1600*1000mm 1800*1200mm
Laser Power 80W/100w/120w/150w/
Laser Type CO2 Sealed Laser Tube ,10.6μm
Cooling Type Water Cooling
Engraving Speed 0-60000mm/min
Cutting Speed 0-40000mm/min
Laser Output Control 0-100% set by software
Min. Engraving Size Chinese: 2.0mm*2.0mm, English Letter: 1.0mm*1.0mm
Highest Scanning Precision 4000DPI
Locating Accuracy ≤+0.01mm
Controlling Software DSP Control System
Graphic Format Supported DST PLT BMP DXF DWG AI LAS,etc
Compatible Software CORELDRAW,PHOTOSHOP, AUTOCAD,TAJIMA,etc.
Color Separation Yes
Drive System High-precision 3-phase Stepper Motor
Auxiliary Equipments Exhaust Fan and Air Exhaust Pipe
Power Supply AC110V/220V+10%,50HZ/60HZ
Working Environment Temperature:0-45C,Humidity 5-95%(No Condensate Water)

Send us a message

Company

No.1299, Xinluo Ave Hi-tech Zone Jinan, Shandong, China

Privacy Statement

© 2017 BODOR